Grom boost

In our previous reporting of the Twin Fin Invitational (TFI), we covered the competition in Zarautz, the pumping day in Mundaka, the epic meals and hospitality, and the overall vibe of creating an experience far greater than just a contest.

This is all of result of William Aliotti’s vision of sharing what he loves most and, along the way, the creativity starts to catch on and everyone joins in making it special. In the fourth and final episode of the 2026 TFI, we see this in action during the visit to the Pukas Surf Factory and the cash for tricks skate contest for the locals.

The skate session brought tons of spectators down to the skatepark where boys and girls were flying high above the lip and really feeding off the energy. The vert ramp was the center of the action where a couple of young kids around 10-14-years-old, who were absolutely ripping and tirelessly dropping in, again and again.

Given the intertwined history of surfing and skating, it was only fitting to bring the two together during the weeklong festivities. The fact that there were cash prizes, plus tons of gear from the event sponsors, really hyped up the local skaters and had them all charging.

This girl was epic. Rolling Stones socks, taped up Vans shoes, and hand-planting tough.

Chris Dodds

Pukas Factory

The idea was simple: bring everyone to the factory, lay out some blanks and paint, then see what happens. It wasn’t long before each of the several shaping bays was alive with action. In one room Tom Curren was holding court and explaining, to rapt listeners, his preferred outlines, edges, and contours.

Tom Curren worked out a new board in one of the Pukas shaping bays.

Chris Dodds

In another, Ian “Gato Son” Gottron and Greyson Messier were tag-teaming a blank, as were Aritz Aranburu and Kepa Acero. Outside, Clay Marzo, Lily Young, and others all took turns painting a finished blank that will be in use for next year’s gathering.

“Sometimes, I get these ideas that I want to try and I have no idea how they’ll turn out. This was one, I just thought, wouldn’t it be fun to get everyone to the factory and see what happens. I’m so stoked how everyone got involved, this is what it’s all about.”

Clay Marzon, Lily Young, and William Aliotti all painting the same board that will be ready for next year’s event.

Chris Dodds

If you know about Pukas surf lore, you would know that they’ve been around since the ’70s and are the official European distributors for brands like Channel Islands, Christenson, …Lost, and play host to a range of residencies to legends like Maurice Cole, Barrett Miller, and Ellis Ericson, to name a few.

Vintage Pukas shapes from over the years.

Chris Dodds

What you might now know is just how dialed their operation truly is and how it all came after a devastating loss — a factory fire. Back in 2017, towards the end of one fateful day, a worker noticed that a small fire had started in one of the rooms. By the time he came back with a fire extinguisher, less than a minute later, the flames were massive. He alerted the rest of the staff and thankfully everyone made it out alive.

As I toured the Pukas facility, Adur Letemendia, whose mother and father started Pukas, told me, “Man, it was crazy. Whenever you have an old factory, all of the dust that collects, in all those places you can’t reach, just becomes fuel. Once a spark hits, things happen quick. We were so lucky no one was hurt.”

Knowing better than to test their luck twice, when it came time to build the new factory, they put everything they had learned over the decades into the design of the new build. The result was a completely state of the art factory that prioritizes safety, worker well-being, and efficiency.

The new space is open, well-lit, and perfect for creating the highest quality boards across multiple labels.

Chris Dodds

Adur added, “We’ve hosted Britt (Merrick), Chris (Christenson), Matt (Biolos), Jon (Pyzel), and others over the years and they’ve all taken notes. I don’t think anyone else has anything quite like this because, the fact is, most surfboard factories are in old buildings that were designed for other things. The blessing from the fire is that we were able to start fresh and do things no one could have imagined for a surfboard factory.”

Whereas most factories are dark and rather toxic-smelling, the Pukas compound has ample natural light, robust ventilation systems (the most expensive items of the new build), tons of storage space for blanks, and a layout that allows easy access and collaboration.

Blanks on blanks on blanks.

Chris Dodds

If you find yourself in the Basque Country and needing a board, be sure to check one of the Pukas shops in either Zarautz or San Sebastián.

Related: “This is the Best Contest I’ve Ever Done”: Inside the Twin Fin Invitational

Original Post from this site

By admin

SurfinDaddy has been hanging around the periphery of the web since 2001 – but the dawn of 2021 sees us ready to jump into the fray. No longer content to be an outsider (but loving that our readership will be those who love the outdoors) we’re poised to become your online resource for all things related to boardsports.